!
! This is the latest information on the use of Segments for EMAS3.
! Segments 0-63 correspond roughly to Public in EMAS2
! Segments 64-255 are the equivalent to Local in Emas2
! Segments 241-255 vanish from the Segment table when User is running
! but re-appear when Director is entered.
!
!     Seg 0                             address page 0 and used for
!                                       the zero page (page 1) and
!                                       writing to real addresses (page 2)
!     Seg 1                             segment table segment
!     Seg 2                             Supervisor stack
!     Seg 3                             Alternate Local Controller Stack for Amdahl
!                                       which uses 24 bit virtual addresses in Priv instrns
!     Seg 4                             Supervisor code
!     Segs 5-7                          free (for testing on 24 bit machines
!                                       these contain overflow portions of code)
!     Seg 8                             Supervisor Gla
!     Segs  9-11                        Free
!     Segs 12-15                        Reserved for SSP
!     Segs 16-19                        Fress
!     Seg 20                            Parameter (parm) table
!     Seg 21                            Active Memory table
!     Seg 22                            AMTDD Table
!     Seg 23                            Store table
!     Segs 24-29                        Free
!     Seg 30                            Main Printer Buffer
!     Seg 31                            The COM Segment (ex public 48)
!     Segs 32-63                        Reserved for real->Virtual Mapping
!
!     Seg 64                            Local Controller Stack (incorporating
!                                       4 contexts[ssn+1s] and the DIRCSEG
!                                       formerly local 10)
!     Seg 65                            Director stack
!     Seg 66                            Signal Stack
!     Seg 67                            Director Code
!     Segs 68-71                        Free (code on 4341)
!     Seg 71                            Free
!     Seg 72                            Subsytem code
!     Seg 73-239(inc)                   For connected Files
!     Seg 240-254                       For Director indexes & tables
!     Seg 255                           Directore Gla(Must be private!)
!
%constinteger PAGE0 SEG=0;              ! Segment for pages 0,1,2
%constinteger SEGTAB SEG=1;             ! Segment for segment table
%constinteger PPSEG=20;                 ! Segment for Parameter  table
%constinteger AMTASEG=21;               ! Segment for Active Memory table
%constinteger AMTDDSEG=22;              ! Segment for AMTDD Table
%constinteger STORESEG=23;              ! Segment for Store Table
%constinteger PBSEG=30;                 ! Segment for main printer buffer
%constinteger COMSEG=31;                ! Segment for comm area
%constinteger LCSTKSEG=64;              ! Local Controller Stack segment
%constinteger DCODESEG=67;              ! Director Code segment
%constinteger DGLASEG=255;              ! Directore GLA SEg
%constinteger DSTKSEG=65;               ! Directors Stack
%constinteger DSIGSTKSEG=66;            ! Director Signal Stack