!TITLE Index
!KEY

Type the entry you require (or the first part of it) followed by '?'.
The resulting screenful should contain the entry; if it doesn't then
the entry isn't in the index.

Examples:
           record?
           cons?

You can access the index from anywhere in the file by prefixing the above
with 'index,'.  Thus

           index,byte?
!STOP
!<!!
!KEY
!!                            2.5/3
&                             2.5/3
(*)       2.2.5/4, 3.2.4/3, 4.2.3/3
**                            2.4.1
****                          2.4.1
+                             2.4.1
-                             2.4.1
->                              2.6
.                             2.6/2
/                             2.4.1
<-             2, 2.4.1, 2.5/2, 2.6
<<                            2.5/3
=                   2.4.1, 2.5, 2.6
==                            2.2.4
>>                            2.5/3
ADDR                          6.1.2
Advisory Service                T/4
Algol 60                        T/5
   drawbacks                    T/6
%alias                        3.3.3
!>
!<and
!KEY
%and                          4.1/5
ARC COS                         7.2
ARC SIN                         7.2
ARC TAN                         7.2
arithmetic expression         2.4.2
arithmetic operator           2.4.1
   precedence               2.4.1/3
arithmetic variable           2.2.1
array                       2.2.1/3
   dynamic bound            2.2.1/5
ARRAY (mapping fn)          6.1.2.1
array type                    2.1.4
Atlas Autocode                  T/6
base constant                 2.3.2
binary i/o                      5.2
block structure            3.1, T/6
BNF                             T/3
Burroughs Algol                T/10
BYTE INTEGER                6.1.2/2
byte integer                2.1.1/2
!>
!<c
!KEY
%c                            1.2.1
channel                       4.4.3
character
   constant                   2.3.3
   input                      5.1.1
   I/O                          5.1
   non-graphic                1.1/6
   output                     5.1.3
   set                          1.1
CHAR NO                       2.6/8
CLOSE INPUT                 5.1.5/2
CLOSE OUTPUT                5.1.5/2
CLOSE STREAM                  5.1.5
comma                         1.2.1
comment                     1.2.3.1
comparator                    4.1/2
compound instruction          4.2/2
condition                       4.1
   %and                       4.1/5
   comparator                 4.1/2
!>
!<condition (cont)
   compound                   4.1/4
   double-sided               4.1/3
   %not                       4.1/4
   %or                        4.1/5
   order of testing           4.1/7
   simple                       4.1
   string resolution          4.1/4
conditional repetition        4.4.1
%constant                     2.2.5
   array                    2.2.5/4
   record                   2.2.5/7
   ref var                  2.2.5/7
   string                   2.2.5/6
constant               1.2.2.2, 2.3
   base              1.2.2.2, 2.3.2
   character         1.2.2.2, 2.3.3
   decimal           1.2.2.2, 2.3.1
   multi-character          1.2.2.2
   named             1.2.2.2, 2.3.5
   real                     1.2.2.2
!>
!<constant (cont)
   string            1.2.2.2, 2.3.4
contents                        T/1
continuation                  1.2.1
%continue                     4.4.3
% convention                1.2.2.4
COS                             7.2
COT                             7.2
cycle                           4.4
   endless                      4.4
   %for                       4.4.2
   %repeat until            4.4.2/5
   simple form                4.4.2
data type                       2.1
decimal constant              2.3.1
DEL                           1.1/6
Edinburgh                       T/7
   environment                 T/13
%else                       4.2.1/2
EM                            1.1/6
EMAS                      T/8, T/12
!>
!<EMAS IMP80
!KEY
EMAS IMP80                      T/3
endless cycle                   4.4
%end %of %list              1.2.3.3
E OF
   EMAS IMP80-specific          7.2
error messages               10.1.1
event                         3.1.1
EVENT INF                   3.1.1/5
EVENT LINE                  3.1.1/6
event list                  3.1.1/2
executable statement              4
%exit                         4.4.3
EXP                             7.2
expression
   arithmetic                 2.4.2
%external                2.2.5, 3.3
external
   array                    2.2.5/4
   file                       3.3.1
      example                 3.3.2
!>
!<external (cont)
   linkage                      3.3
   procedure                  3.2/8
   record                   2.2.5/7
   ref var                  2.2.5/7
   string                   2.2.5/6
FF                            1.1/7
FLOAT                     2.4.2.2/3
%for cycle                    4.4.1
FRAC PT                   2.4.2.2/3
function                      3.3.3
   call                     3.3.3/2
   intrinsic                    7/2
   %result statement          3.3.3
   side effect              3.3.3/2
global                        3.1/5
HALF INTEGER                6.1.2/2
half integer                2.1.1/3
IBM 370                       2.2.1
ICL 2900                      2.2.1
identifier                  1.2.2.1
!>
!<if
!KEY
%if                           4.2.1
IMOD                      2.4.2.1/3
IMP77                           T/3
IMP80
   block-structured               1
   comparison with AA          T/11
   comparison with Algol60        1
   element                        1
   high-level                     1
   history                      T/5
   implementation               T/2
   machine code                T/10
   object code                  T/9
   philosophy                   T/9
   readability                 T/10
   recent development          T/12
   run-time support             T/9
implementation
   compile-time errors       10.1.1
   EMAS IMP80                  10.1
!>
!<IMP77-specific
!KEY
IMP77-specific                  7.3
%include                    1.2.3.2
input                             5
instruction                     4.2
   conditional                4.2.1
INT            2.4.2.1/3, 2.4.2.1/4
INTEGER                     6.1.2/2
integer                     2.1.1/3
integer expression          2.4.2.1
INT PT                    2.4.2.1/3
intrinsic function              7/2
I/O                           4.4.3
   binary                       5.2
jump                          4.2.2
KDF9                            T/7
keyword                     1.2.2.4
keyword list              1.2.2.4/2
label                         4.2.2
LENGTH                        2.6/8
LENGTHEN I                      7.2
!>
!<LENGTHEN R
!KEY
LENGTHEN R                      7.2
LINT                            7.2
LINT PT                         7.2
%list                       1.2.3.3
LOG                             7.2
logical operators               2.5
long integer                2.1.1/3
LONG LONG REAL              6.1.2/2
long long real              2.1.1/3
LONG REAL                   6.1.2/2
long real                   2.1.1/3
lower case                    1.1/5
Manchester University           T/5
   Mark 1                       T/5
   Mercury                      T/5
manual                          T/3
   conventions              1.2.2.4
   errors                       T/4
mapping function         3.2.4, 6.1
   example                    6.1.1
!>
!<mapping function (cont)
   %result statement          3.2.4
   standard                   6.1.2
MOD                       2.4.2.2/3
%monitor                      4.2.5
named constant                2.3.5
%name-type variable           2.2.4
NEW LINE                    5.1.3/3
NEW LINES                   5.1.3/4
NEW PAGE                    5.1.3/4
NEXT CH                     5.1.1/6
NEXT ITEM                   5.1.1/5
NEXT SYMBOL                 5.1.1/2
NL                   1.1/6, 2.2.5/2
%not                          4.1/4
numeric input                 5.1.2
numeric output                5.1.4
%on %event                    3.1.1
operator
   arithmetic                 2.4.1
%or                           4.1/5
!>
!<own
!KEY
%own                          2.2.5
   declaration              2.2.5/2
   initialisation           2.2.5/3
%own array                  2.2.5/4
%own array initialisation   2.2.5/5
%own record                 2.2.5/7
%own reference variable     2.2.5/7
%own string                 2.2.5/6
paging                          T/5
parameter                     3.2.1
   name                       3.2.1
   procedure                3.2.1/8
   string                   3.2.1/8
   summary                 3.2.1/10
   value                      3.2.1
PI                          2.2.5/2
PL360                          T/10
pointer variable              2.2.4
precision                     2.2.1
PRINT                       5.1.4/2
!>
!<PRINT CH
!KEY
PRINT CH                    5.1.3/3
PRINT FL                    5.1.4/3
PRINT STRING                5.1.3/2
PRINT SYMBOL                  5.1.3
procedure                       3.2
   external                   3.2/8
   first line                 3.2/4
   global variable            3.2/6
   heading                    3.2/4
   parameter                  3.2.1
   recursive                  3.2/8
   %spec statement            3.2/5
   standard                   3.2/8
   user-written               3.2/8
program
   example                    1.2/3
   structure                    1.2
quotes (' and ")              1.1/4
RADIUS                          7.2
READ                          5.1.2
!>
!<READ CH
!KEY
READ CH                     5.1.1/6
READ ITEM                   5.1.1/4
READ STRING                 5.1.1/3
READ SYMBOL                   5.1.1
REAL                        6.1.2/2
real                        2.1.1/3
real expression             2.4.2.2
record
   alternative format       2.2.3/3
   array                    2.2.3/8
   assigment to 0          2.2.3/10
   assignment operator      2.2.3/9
   explicit format          2.2.3/5
   list processing          2.2.4/7
   record name for format   2.2.3/5
   sub-field       2.2.3/2, 2.2.3/6
record format                 2.2.3
record format spec         2.2.3/11
RECORD (mapping fn)         6.1.2.2
record name                 2.2.4/5
!>
!<record type
!KEY
record type                   2.1.3
record variable               2.2.3
recursive procedure           3.2/8
reference type                2.1.5
reference variable       2.2.4, 6.1
   assignment to              2.2.4
REM                             7.3
%repeat until               4.4.1/5
RESET INPUT                 5.1.5/2
RESET OUTPUT                5.1.5/2
%result=      3.2.4, 3.2.4/3, 3.3.3
   use                      3.2.4/2
Robertson, Peter                T/3
routine                       3.2.2
routine call                  3.2.2
running a program             1.2/2
scope                         3.1/5
SELECT INPUT                    5.1
SELECT OUTPUT                   5.1
SHORTEN I                     7.2/2
!>
!<SHORTEN R
!KEY
SHORTEN R                     7.2/2
SHORT INTEGER               6.1.2/2
short integer               2.1.1/2
%signal %event              3.1.1/4
SIN                           7.2/2
SKIP SYMBOL                 5.1.1/3
SPACE                       5.1.3/3
space char                    1.1/5
SPACES                      5.1.3/3
special symbol              1.2.2.3
   use                    1.2.2.3/2
%spec statement               3.2/5
SQRT                          7.2/2
stack                    3.1/6, T/6
stack pointer                 3.1/6
standard procedure         3.2/8, 7
   intrinsic                    7/2
   list of                      7.1
%start/%finish                  4.3
statement                       1.2
!>
!<statement (cont)
   component                  1.2.2
   continuation               1.2.1
statement type                1.2/5
Stephens, Peter                 T/3
%stop                         4.2.4
storage allocation            3.1/6
store mapping                     6
stream                        4.4.3
   closing                    5.1.5
STRING                      6.1.2/2
string
   comparing                2.2.2/4
   concatenation              2.6/3
   resolution                 2.6/3
string constant               2.3.4
%string %name               2.2.4/4
string operator                 2.6
string resolution             2.6/3
string type                   2.1.2
string variable               2.2.2
!>
!<SUB
!KEY
SUB                           1.1/6
SUBSTRING                     2.6/8
switch                        4.2.3
syntax                            9
   notes                        9.1
TAN                           7.2/2
%then                         4.2.1
TO STRING                     2.6/9
type                            2.1
   arithmetic                 2.1.1
   array                      2.1.4
   integer                    2.1.1
   real                       2.1.1
   record                     2.1.3
   reference                  2.1.5
   string                     2.1.2
TYPE OF                         7.3
user-written procedure        3.2/8
variable                        2.2
   arithmetic                 2.2.1
!>
!<variable (cont)
   pointer                    2.2.4
   record                     2.2.3
   reference                  2.2.4
   string                     2.2.2
%while cycle                  4.4.1
Whitfield, Prof. H.             T/7
WRITE                         5.1.4
\                      2.4.1, 2.5/3
\\                            2.4.1
^                             2.4.1
^^                            2.4.1
|...|                     2.4.2.2/3
~                             2.5/3