@make[report] @device[x2700] @flushright[Report Annex 1] @majorheading[X25 Campus Packet Switching Exchange (CPSE) Additional Specification] @paragraph[Control] The following should be possible without a reload of the entire switch. @begin[itemize] Change Link addresses and routing tables change line speeds. change Logical group assignments change between DTE and DCE @end[itemize] @subheading[Configuration A] @begin[verbatim] PSE with 10 X25 connections - 1 x 48 kbps, 9 x 9.6 kbps, including 1 inter-network connection. @end[verbatim] @subheading[Minimum Performance] @begin[verbatim] 100 packets/second peak. 75 packets/second mean. 100 simultaneous calls. Peak = no Network management activity. no Gateway activity. no calls created or cleared. Mean = 5 calls/second created and cleared. Packets are all packets - data and acknowledgements. @end[verbatim] @subheading[Configuration B] @begin[verbatim] PSE with 18 X25 connections - 2 x 48 kbps, 16 x 9.6 kbps, including 1 inter-network connection. @end[verbatim] @subheading[Minimum Performance] @begin[verbatim] 200 packets/second peak. 150 packets/second mean. 200 simultaneous calls. Peak and mean are defined in configuration A. @end[verbatim] @subheading[Configuration C] @begin[verbatim] PSE with 48 X25 connections - 4 x 48kbps, 44 x 9.6 kbps, including 2 inter-network connections. @end[verbatim] @subheading[Minimum Performance] @begin[verbatim] 700 packets/second peak. 600 packets/second mean. 600 simultaneous calls. Peak and mean as defined in configuration A. @end[verbatim] @subheading[Configuration D] @begin[verbatim] PSE with 100 X25 - 8 x 48 kbps, 92 x 9.6 kbps with 4 inter network connections. @subheading[Minimum Performance] 1000 packets/second peak. 800 packets/second mean. 1000 simultaneous calls. @end[verbatim]